top of page
WHICH PRODUCT DO YOU NEED?
CVL has strategic partnership with globally recognized manufacturers who take pride in stringent quality control testing of their product that meets and exceeds domestic and international standards.
All products distributed by CVL have Intertek Automotive Research.
Pure Guard Full Synthetic Dexron VI
Full Synthetic Global ATF is a full synthetic premium fluid designed for automatic transmissions of all
North American, European, and Asian passenger car and commercial vehicles. Full Synthetic Global
ATF provides exceptional oxidation, wear, frictional stability, sludge and deposit prevention, and antishudder
properties required in today’s high performance transmissions. It is also designed to deliver
premium performance in older transmissions.
North American, European, and Asian passenger car and commercial vehicles. Full Synthetic Global
ATF provides exceptional oxidation, wear, frictional stability, sludge and deposit prevention, and antishudder
properties required in today’s high performance transmissions. It is also designed to deliver
premium performance in older transmissions.
TruValue Dexron III
Multi-Purpose ATF is an automatic transmission fluid that has been created for electronically
controlled transmissions. This product may be used in GM automatic transmission units that require the
use of Dexron ®IIIH, Dexron® IIIG, Dexron® IIE, Dexron ®IID, Dexron ®II, and Dexron® fluids; and is a
qualified Ford Mercon ®ATF. Further, it meets the performance requirements for Allison Transmission
Division (C-4), and major hydraulic pump manufacturers’ requirements for antiwear hydraulic fluids.
Multi-Purpose ATF provides excellent friction stability, oxidation, anti-wear properties, and lowtemperature fluidity desired for most automatic transmissions.
controlled transmissions. This product may be used in GM automatic transmission units that require the
use of Dexron ®IIIH, Dexron® IIIG, Dexron® IIE, Dexron ®IID, Dexron ®II, and Dexron® fluids; and is a
qualified Ford Mercon ®ATF. Further, it meets the performance requirements for Allison Transmission
Division (C-4), and major hydraulic pump manufacturers’ requirements for antiwear hydraulic fluids.
Multi-Purpose ATF provides excellent friction stability, oxidation, anti-wear properties, and lowtemperature fluidity desired for most automatic transmissions.
Carb & Air Intake Cleaner
Removes varnish, sludge and other deposits from carburetor, linkage, PCV valves, automatic choke and air intake.
For sale in areas that do not regulate the VOC content of consumer products.
For sale in areas that do not regulate the VOC content of consumer products.
Bluemagic Headlight Lens Restorer
Removes yellowing
Restores optical clarity
Eliminates haze
Improves visibility and safety
Restores optical clarity
Eliminates haze
Improves visibility and safety
Pag 100
Premium polyalkylene glycol (PAG) in three viscosity grades for R-134a systems, provides superior protection against compressor wear and prevents lubricant breakdown even under extreme conditions.
Pag 100UV
Three different viscosity grades of premium polyalkylene glycol (PAG) lubricants formulated for R-134a A/C systems.
An SAE-approved UV dye is included to make A/C leak detection fast and efficient.
An SAE-approved UV dye is included to make A/C leak detection fast and efficient.
Pag 46
Premium polyalkylene glycol (PAG) in three viscosity grades for R-134a systems, provides superior protection against compressor wear and prevents lubricant breakdown even under extreme conditions.
Pag 100
Premium polyalkylene glycol (PAG) in three viscosity grades for R-134a systems, provides superior protection against compressor wear and prevents lubricant breakdown even under extreme conditions.
R-134A High Mileage
High mileage R-134a refrigerant.
Extra protection for older cars.
With leaks stop and lubricant.
Extra protection for older cars.
With leaks stop and lubricant.
Pag 46UV
Three different viscosity grades of premium polyalkylene glycol (PAG) lubricants formulated for R-134a A/C systems.
An SAE-approved UV dye is included to make A/C leak detection fast and efficient.
An SAE-approved UV dye is included to make A/C leak detection fast and efficient.
R134A
For use in factory installed and/or retrofitted R-134a auto A/C systems.
Comes with standard ACME threaded cap. Meets AHRI 700-2006 and SAE J 2276 purity standards.
Made in the USA
Comes with standard ACME threaded cap. Meets AHRI 700-2006 and SAE J 2276 purity standards.
Made in the USA
CVT ATF
CVT Fluid is a full synthetic automatic transmission fluid specifically formulated for today’s technologically sophisticated variable transmissions. This product eliminates the need to stock multiple, limited OEM brands. CVT Fluid has equal, and in most cases, better performance than the most common North American CVT Fluids being supplied by leading OEMs. CVT Fluid provides engineered anti-shudder performance for smooth transfer of power, exceptional anti-oxidation and anti-wear protection in highly sophisticated variable transmissions.
R134A
For use in factory installed and/or retrofitted R-134a auto A/C systems.
Comes with standard ACME threaded cap.
Meets AHRI 700-2006 and SAE J 2276 purity standards
Comes with standard ACME threaded cap.
Meets AHRI 700-2006 and SAE J 2276 purity standards
Mass Air Flow Cleaner
Helps improve performance and fuel economy, dissolves grease, removes dirt and flux and helps to restore engine performance.
Fast acting and drying formula, safe for plastics, leaves no residue.
Can be used at every air filter change.
360° valve ensures product sprays in any position.
Fast acting and drying formula, safe for plastics, leaves no residue.
Can be used at every air filter change.
360° valve ensures product sprays in any position.
Octane Booster
Formulated to help stop knocking caused by low octane fuels.
Fuel Injector Cleaners
Cleans fuel injectors and carburetors to help improve fuel economy and performance.
Helps reduce exhaust emissions.
Helps reduce exhaust emissions.
Smoke Eliminator
Formulated to help reduce exhaust smoke, quiet lifters, restore compression and improve performance in oil burning engines
Reduces oil consumption caused by blow-by in the combustion chamber.
Reduces oil consumption caused by blow-by in the combustion chamber.
Power Steering Fluid with Conditioners
With Conditioners.
A high quality power steering fluid and conditioner.
Mixes with most factory power steering fluids.
Helps stop pump squealing, protects seals and helps prevent unusual wea
A high quality power steering fluid and conditioner.
Mixes with most factory power steering fluids.
Helps stop pump squealing, protects seals and helps prevent unusual wea
Oil Treatment
Quiets noisy engines
Reduces oil burning
This high viscosity lubricant coats moving parts with a tough film that decreases friction and increases power.
Reduces oil burning
This high viscosity lubricant coats moving parts with a tough film that decreases friction and increases power.
Engine Flush
A premium crankcase cleaner
While some products are only a solvent, Johnsen s Engine Flush also contains a special residue solubilizer and a high quality oil.
Use prior to changing oil.
Engine flushing provides better oil flow and helps maintain engine power
While some products are only a solvent, Johnsen s Engine Flush also contains a special residue solubilizer and a high quality oil.
Use prior to changing oil.
Engine flushing provides better oil flow and helps maintain engine power
Pure Guard 5w30 API SN
Combats Low Speed Pre-Ignition (LSPI)
• Protects engines under all driving conditions
• Lowers friction and improves gas mileage
Provides longer engine life
•Protects against rust, corrosion and varnish
Resists thermal break-down
• Protects engines under all driving conditions
• Lowers friction and improves gas mileage
Provides longer engine life
•Protects against rust, corrosion and varnish
Resists thermal break-down
Power Steering Fluid Honda Acura
Johnsen Premium Power Steering Fluid for Honda/Acura
Long-Life-RED-Formula
Engine radiator additive ready to use, 5 Years / 150,000 Mile Protection
5 IN 1 PROTECTION: OAT Long Life, Over Heating. Rust. Corrosion. Lubrication.
Complies with all OEM manufacturers. • Bio-Degradable. • Ethylene Glycol Free.
Protects: Engine, water pump, hoses, radiator, radiator cap, thermostat and all plastic components of the cooling system.
Formulated with POAT (Poly Organic Acid Technology)
Safe to use with: Cast iron, steel, aluminum, copper, brass, magnesium, and all late model alloys.
Easy blending with any RED Antifreeze/Coolant propylene or ethylene glycol base.
Do not add water – Ready to use. Complies with international ASTM D1384, D3306, D4985.
Boiling point: 235°F/112.8°C, 15psi radiator cap at sea level.
5 IN 1 PROTECTION: OAT Long Life, Over Heating. Rust. Corrosion. Lubrication.
Complies with all OEM manufacturers. • Bio-Degradable. • Ethylene Glycol Free.
Protects: Engine, water pump, hoses, radiator, radiator cap, thermostat and all plastic components of the cooling system.
Formulated with POAT (Poly Organic Acid Technology)
Safe to use with: Cast iron, steel, aluminum, copper, brass, magnesium, and all late model alloys.
Easy blending with any RED Antifreeze/Coolant propylene or ethylene glycol base.
Do not add water – Ready to use. Complies with international ASTM D1384, D3306, D4985.
Boiling point: 235°F/112.8°C, 15psi radiator cap at sea level.
Long-Life-GREEN-Formula
Engine radiator additive ready to use, 5 Years / 150,000 Mile Protection.
5 IN 1 PROTECTION: OAT Long Life, Over Heating. Rust. Corrosion. Lubrication.
Complies with all OEM manufacturers. • Bio-Degradable. • Ethylene Glycol Free.
Protects: Engine, water pump, hoses, radiator, radiator cap, thermostat and all plastic components of the cooling system.
Formulated with MFOAT (Multi-Functional Organic Acid Technology)
Safe to use with: Cast iron, steel, aluminum, copper, brass, magnesium and all late model alloys.
Easy blending with any GREEN colors Antifreeze / Coolant.
Do not add water – Ready to use.
Complies with International ASTM D6211, D1384.
Boiling point: 235°F/112.8°C, 15psi radiator cap at sea level.
5 IN 1 PROTECTION: OAT Long Life, Over Heating. Rust. Corrosion. Lubrication.
Complies with all OEM manufacturers. • Bio-Degradable. • Ethylene Glycol Free.
Protects: Engine, water pump, hoses, radiator, radiator cap, thermostat and all plastic components of the cooling system.
Formulated with MFOAT (Multi-Functional Organic Acid Technology)
Safe to use with: Cast iron, steel, aluminum, copper, brass, magnesium and all late model alloys.
Easy blending with any GREEN colors Antifreeze / Coolant.
Do not add water – Ready to use.
Complies with International ASTM D6211, D1384.
Boiling point: 235°F/112.8°C, 15psi radiator cap at sea level.
Long Life Diesel Formula
Made with OAT Long Life Technology, Silicate & Phosphate free
Ready to use. 5 Years / 150,000 Mile Protection/ up to 15,000 hours.
Available in Green, Red, Blue, Marine and Industrial Formulas
PROTECTION: Overheating, against rust, corrosion, oxidation & electrolysis. Complies with all OEM manufacturers, Environmentally Friendly, Bio-Degradable, and Ethylene Glycol Free. NEW FORMULA FOR: HEAVY DUTY DIESEL ENGINES, passengers cars, long haul trucks, buses, 4×4’s, SUV, agricultural equipment, marine, construction equipment, stationary motors and industrial power generators. Formulated with HOAT, NOAT and OAT (Hybrid Organic Acid Technology) provides excellent protection to the entire cooling system for both light and heavy duty applications. Designed to provide 3 types of Mono-Molecular corrosion protection. Protects Wet cylinder sleeves from electrolysis. Piston liners, radiator, and water pump from surface scaling and cavitation. Hoses and polymer components from extreme heat conditions. Phosphate free and low TDS formula that prevents surface scaling of cooling components. Also protects high mileage and older engines. Compatible with all types of Antifreeze/Coolants, including Extended Long Life Antifreeze. Complies with International ASTM standards D6210, D2570, D 2809 and Dl 384 TMC of ATA RP329/330/338. Boiling point: 235F/112.8C, 15psi radiator cap at sea level.
Ready to use. 5 Years / 150,000 Mile Protection/ up to 15,000 hours.
Available in Green, Red, Blue, Marine and Industrial Formulas
PROTECTION: Overheating, against rust, corrosion, oxidation & electrolysis. Complies with all OEM manufacturers, Environmentally Friendly, Bio-Degradable, and Ethylene Glycol Free. NEW FORMULA FOR: HEAVY DUTY DIESEL ENGINES, passengers cars, long haul trucks, buses, 4×4’s, SUV, agricultural equipment, marine, construction equipment, stationary motors and industrial power generators. Formulated with HOAT, NOAT and OAT (Hybrid Organic Acid Technology) provides excellent protection to the entire cooling system for both light and heavy duty applications. Designed to provide 3 types of Mono-Molecular corrosion protection. Protects Wet cylinder sleeves from electrolysis. Piston liners, radiator, and water pump from surface scaling and cavitation. Hoses and polymer components from extreme heat conditions. Phosphate free and low TDS formula that prevents surface scaling of cooling components. Also protects high mileage and older engines. Compatible with all types of Antifreeze/Coolants, including Extended Long Life Antifreeze. Complies with International ASTM standards D6210, D2570, D 2809 and Dl 384 TMC of ATA RP329/330/338. Boiling point: 235F/112.8C, 15psi radiator cap at sea level.
bottom of page